各位大俠，我想模擬干涉儀，弄好光路后，發現平面的不規則度不知在哪里設置，比如λ/10的不規則度能模擬嗎，或者有其他的軟件能夠模擬這個的教下我。。。

試試看用公差分析，能不能做。 [5MV$)"!j  
ZEMAX不能在設計中考慮表面不規則度的。

多謝這位大俠回答。。 m/aA q8  
看來真不能了，公差分析只是在序列里面，況且他只起分析作用，沒感覺能具體模擬用的 [}?E,1Q3  

二位大俠， 7O'u5N  
我理解,zemax是可以完成的。我曾經在非序列中做過類似的分析模擬，及干涉圖的回歸重構再現。 =wFl(Q6J  
祝成功，多交流。 MUMB\K*$  
TZa LB}4  

圖片:flatness_interference.JPG

e@g=wN"@  
p}|<EL}Z9  
3PaMq6Ca  

膜拜，怎么弄的，版主大人

zemax中有個例子的,可以借鑒借鑒

下下來好好看看吧！

optifdtd fx/If  
不一樣啊，例子里面是直條紋，樓主給的好像是粗糙度干涉條紋的樣子、、、

There is a Zernike Sag surface in non-sequential mode, you may use it to represent the irregualr surface feature. Of course this would not be the same as the actual insertion of the real lens or surface as this surface has no thickness. If you could have some Zernike coefficient data (such as from Zygo) you may be able to implement the irregularity of the surface.  fG|+!  
I7jIA>ZZi  

hopebox:There is a Zernike Sag surface in non-sequential mode, you may use it to represent the irregualr surface feature. Of course this would not be the same as the actual insertion of the real lens or surface as this surface has no thickness. If you could have some  .. (2012-05-31 21:41)  cUZ^,)8 Z  

?=\_U  
o~thank you very mach. i will try it according to your remind @!s(Zkpev