Provide more information would be useful, but it sounds like that this effect may not be minimized during the design processes if all the lenses are properly coated.
yu-xuegang
2014-02-14 23:32
hopebox:Provide more information would be useful, but it sounds like that this effect may not be minimized during the design processes if all the lenses are properly coated.(2014-02-14 20:20)嬀/color] *$Df)iI6
l ^*GqP5 2樓的意思是有可能是鬼像，確認鍍膜是否達到要求。
hopebox
2014-02-17 20:26
Yes, it's just a thought that it might be 鬼像. When I said if there is no problem with the coating I meant that if the coating was done and performing as it was designated to then the coating is already doing its best. If so, then the design concept may not have minimized this effect. Like the other reply, having more information would be helpful.
zizulj
2014-02-18 13:52
膠合件膠合是否正確
pigpig
2014-02-19 11:36
這個需要了解
gongshaobin
2014-02-26 21:38
hopebox:Yes, it's just a thought that it might be 鬼像. When I said if there is no problem with the coating I meant that if the coating was done and performing as it was designated to then the coating is already doing its best. If so, then the design concept may n .. (2014-02-17 20:26) ~pn9x;N%H
`)F lb|da 膠合件測了，中心厚度沒有問題，已經膠合了沒辦法拆開測
gongshaobin
2014-02-26 21:50
hopebox:Yes, it's just a thought that it might be 鬼像. When I said if there is no problem with the coating I meant that if the coating was done and performing as it was designated to then the coating is already doing its best. If so, then the design concept may n .. (2014-02-17 20:26) N10'./c K
.9> e r 感謝您的回答，這個問題還沒有解決，問了好多設計人員，也沒有給出明確的答復，期待后來者呀
gongshaobin
2014-02-26 21:50
yu-xuegang:2樓的意思是有可能是鬼像，確認鍍膜是否達到要求。 (2014-02-14 23:32) TF|GGY i
TxwZA 膠合件沒有涂墨，做替換實驗發(fā)現膠合件影響的呀
gongshaobin
2014-02-26 21:51
生人莫近:上圖看看 (2014-02-14 10:10) m=PSC Ib
JE9|;A 在暗室中無法拍下清晰的畫面。。。無法上圖
hopebox
2014-02-26 22:05
Do you have a photo of these multiple image effect? f<uLbJ6 '_g8fz
3 If you think its the doublet that causes this problem then check the ray tracing for ghost image analysis to confirm it's not a design issue but rather a fabrication issue. at least it help to narrow down it's design or the manufacturing problem.
gongshaobin
2014-02-27 21:25
hopebox:Do you have a photo of these multiple image effect? zW!3>(L/ If you think its the doublet that causes this problem then check the ray tracing for ghost image analysis to confirm it's not a design issue but rather a fabrication issue. at least it help to narrow dow .. (2014-02-26 22:05) z\oq b) a
