无码日韩精品一区二区免费_极品尤物一区二区三区_国产在线乱码一区二三区_内射女校花一区二区三区

首頁 -> 登錄 -> 注冊 -> 回復主題 -> 發表主題

光行天下 -> 機械設計,制造及其自動化 -> plastic design [點此返回論壇查看本帖完整版本]

[打印本頁]

anvils

2008-01-17 01:09

plastic design

Design Tips for Rapid Injection Molding
As illustrated in figure 1, draft is the angle between the direction of ejection of a part from the mold and the surface of the part. Its traditional function is to facilitate the removal of the part from the mold, but in Protomold’s Rapid Injection Molding process, it also permits deeper geometries to be milled while reducing cost and insuring trouble free molding. Drafts of 1.0 degree and larger may result in lower costs with the Rapid Injection Molding process.
It is important that textured surfaces have adequate draft to prevent the part from sticking in the mold and to prevent “drag” marks. Protomold requires that lightly textured surfaces (T-1) have a minimum of 3 degrees of draft and that more heavily textured surfaces (T-2) have a minimum of 5 degrees of draft.
Another example of the importance of draft in the manufacturability of your design is illustrated in figure 2. In this case the draft not only helps the part eject from the mold more easily, but it also minimizes the amount of sliding required between the mold’s telescoping shutoff surfaces. A minimum of 3.0 degrees of draft is required for telescoping shutoff features.
Draft your way to a better part
©2007 Protomold. All rights reserved. Volume 1 n Draft your way to a better part n 3
It is important that textured surfaces have adequate draft to prevent the part from sticking in the mold and to prevent “drag” marks.
Figure 1: Draft definition.